Name: Urban Plumbers Ltd
Price range: $$$

Biasi Riva Plus HE – boiler cutting out on hot water and heating

posted on 02 Dec 2015

Biasi Riva Plus HE M296.24 SM/C boiler not working correctly. Symptoms were as follows (same at heating and hot water):

boiler would fire up and then cut out after around 1-3 minutes
boiler would only restart after manual reset

After quick investigation I found out that it is circulation problem that causes this boiler to overheat and shut down. Possible culprits to this situation are: failling pump or scaled/blocked main heat exchagner. It is worth noting that sometimes similar symptoms can happen with faulty PCB, thermistors, overheat stats or wiring. In this case it was however a major component at fault.

Faulty part was quickly identified and replaced the same day.

If you require your Biasi Riva boiler repaired in London please contact me here.

Biasi Riva repaired and working correctly.

Sticky articles

20 November 2022

Vaillant Eco Tec Plus system boiler hot water priority diagrams

This are diagrams for domestic hot hot water priority set up using: – Vaillant system boilers – Vaillant SensoComfort controls with VR 71 wiring ceters – System with hot water cylinder, radiators and UFH

04 January 2022

Vaillant F.75 error code – full boiler repair

This Vaillant boiler has been suffering from error codes F.75 and low pressure on the pressure gauge. There was also a visible leak to the right-hand side of the boiler. When I opened the boiler, I found a source of the leak – it as scaled Automatic Air Vent on the boiler pump. First call […]

04 October 2021

Ideal Logic intermittent ‘ignition lockout’ message, L2 boiler fault, error code

Ideal Logic combi boiler is one of the most popular combination boilers installed in the UK today. There are thousands of those boilers installed in homes in the UK. One of the most common errors on these boilers is: Ignition Lockout / L2 error code – Ideal Logic / Ideal Independent / Ideal Classic Depending […]